W tym świecie moc obliczeniowa prowadzi do cudów. Moc obliczeniowa może odgrywać ważną rolę w rozwiązywaniu problemów, wokół których nas kręci. Jest to jeden z powodów, dla których cała branża technologiczna (w tym Microsoft ) inwestuje w obliczenia kwantowe^(Quantum) , które pomogą uczynić komputer bardziej wydajnym w rozwiązywaniu tych problemów. Folding Home to projekt obliczeń rozproszonych, który przeprowadza symulacje dynamiki molekularnej dynamiki białek.

Microsoft opublikował szczegółowy przewodnik, dzięki któremu każdy może przekazać projektowi zasoby swojego komputera. W tym przewodniku będziemy rozmawiać o tym, jak bezpiecznie przekazać czas procesora za pomocą ^(CPU)Windows Sandbox .

Bezpiecznie przekaż czas procesora^(CPU) za pomocą Windows Sandbox

Zanim zaczniesz, musisz się upewnić, że Windows Sandbox jest włączony na Twoim komputerze^{(Windows Sandbox is enabled on your computer)} .

Teraz otwórz Notatnik^(Notepad) i skopiuj i wklej do niego następujący kod:

#Requires -RunAsAdministrator

#For a custom username, add -username <your username> to the command execution
param([string]$username=‘wsandbox_anon‘)
$ProgressPreference = ‘SilentlyContinue‘ #Progress bar makes things way slower

# Ensure that virtualization is enabled in BIOS.
Write-Output ‘Verifying that virtualization is enabled in BIOS…‘
if ((Get-WmiObject Win32_ComputerSystem).HypervisorPresent -eq $false) {
Write-Output ‘ERROR: Please Enable Virtualization capabilities in your BIOS settings…‘
exit
}

# Determine if Windows Sandbox is enabled.
Write-Output ‘Checking to see if Windows Sandbox is installed…‘
If ((Get-WindowsOptionalFeature –FeatureName ‘Containers-DisposableClientVM‘ –Online).State -ne ‘Enabled‘) {
Write-Output ‘Windows Sandbox is not installed, attempting to install it (may require reboot)…‘
if ((Enable-WindowsOptionalFeature –FeatureName ‘Containers-DisposableClientVM‘ –All –Online –NoRestart).RestartNeeded) {
Write-Output ‘Please reboot to finish installing Windows Sandbox, then re-run this script…‘
exit
}
} else {
Write-Output ‘Windows Sandbox already installed.‘
}

# Download the latest version of FAH.
Write-Output ‘Checking for latest version of foldingathome…‘
$installer_url = ‘https://download.foldingathome.org/releases/public/release/fah-installer/windows-10-32bit/‘

# Use regex to get the latest version from the FAH website.
$version = ((Invoke-WebRequest –Uri $installer_url –UseBasicParsing).Links | Where-Object {$_.href -match ‘^v\d+([.]\d+)?‘} | ForEach-Object {[float]($_.href -replace ‘[^.\d]‘, ‘‘)} | Measure-Object –Max).Maximum
$installer = “$($installer_url)v$($version)/latest.exe“
$installer_size =(Invoke-WebRequest $installer –Method Head –UseBasicParsing).Headers.‘Content-Length‘
Write-Output “Using FAH v$version.“

# Check if the installer is present, download otherwise.
$working_dir = “$env:USERPROFILE\fah_conf“
$install_fname = ‘folding_installer.exe‘
If (!(test-path “$working_dir\$install_fname“) -or (Get-ChildItem “$working_dir\$install_fname“).Length -ne $installer_size ) {
Remove-Item “$working_dir\$install_fname“ –Force –ErrorAction SilentlyContinue
Write-Output “Downloading latest folding executable: $working_dir\$install_fname“
Write-Output “Saving to $working_dir\$install_fname…“
New-Item –ItemType Directory –Force –Path $working_dir | Out-Null
Invoke-WebRequest –Uri $installer –OutFile “$working_dir\$install_fname“
}

# Create the FAH configuration file with the Windows Sandbox FAH team #251561.
Write-Output ‘Creating init command…‘
$conf_file = ‘fah_sandbox_conf.xml‘
Write-Output “Saved [email protected] configuration file to $working_dir\$conf_file“
New-Item –Force –Path “$working_dir\$conf_file“ –ItemType File
Set-Content –Path “$working_dir\$conf_file“ –Value @”
<config>
<user v=’$username‘/>
<team v=’251561’/>
<core-priority v=’low’/>
<power v=’full’ />
<priority v=’realtime’/>
<smp v=’true’/>
<gpu v=’true’/>
<open-web-control v=’true’/>
</config>
“@

<#
Create the script that runs at logon. This script:
1. Starts the installer
2. Creates a volatile working directory
3. Copies the config into the working directory
4. Sets the firewall policies to let FAH run
5. Starts the FAH client
#>
Write-Output ‘Creating init command…‘
$logon_cmd = “$working_dir\init.cmd“
$wdg_install_dir = ‘C:\users\wdagutilityaccount\desktop\fah_conf‘
$wdg_working_dir = ‘C:\users\wdagutilityaccount\desktop\fah_working_dir‘
Write-Output “Saved logon script to $logon_cmd, this will be run upon starting Sandbox.“
New-Item –Force –Path $logon_cmd –ItemType File
Set-Content –Path $logon_cmd –Value @”
start $wdg_install_dir\$install_fname /S
goto WAITLOOP

:WAITLOOP
if exist “C:\Program Files (x86)\FAHClient\FAHClient.exe” goto INSTALLCOMPLETE
ping -n 6 127.0.0.1 > nul
goto WAITLOOP

:INSTALLCOMPLETE
mkdir $wdg_working_dir
cd $wdg_working_dir
echo \”Copying config file to $wdg_working_dir\”
copy $wdg_install_dir\$conf_file $wdg_working_dir
netsh advfirewall firewall Add rule name=”FAHClient” program=”C:\Program Files (x86)\FAHClient\FAHClient.exe” action=allow dir=out
netsh advfirewall firewall Add rule name=”FAHClient” program=”C:\Program Files (x86)\FAHClient\FAHClient.exe” action=allow dir=in
start C:\”Program Files (x86)”\FAHClient\FAHClient.exe –config $wdg_working_dir\$conf_file
“@

# Create the Sandbox configuration file with the new working dir & LogonCommand.
$sandbox_conf = “$working_dir\fah_sandbox.wsb“
Write-Output “Creating sandbox configuration file to $sandbox_conf“
New-Item –Force –Path $sandbox_conf –ItemType File
Set-Content –Path $sandbox_conf –Value @”
<Configuration>
<VGpu>Enable</VGpu>
<MappedFolders>
<MappedFolder>
<HostFolder>$working_dir</HostFolder>
<ReadOnly>true</ReadOnly>
</MappedFolder>
</MappedFolders>
<LogonCommand>
<Command>$wdg_install_dir\init.cmd</Command>
</LogonCommand>
</Configuration>
“@

# For convenience, start the Sandbox.
Write-Output ‘Starting sandbox…‘
Start-Process ‘C:\WINDOWS\system32\WindowsSandbox.exe‘ –ArgumentList $sandbox_conf

Alternatywnie możesz po prostu pobrać go z repozytorium GitHub firmy Microsoft^{(Microsoft’s GitHub repository)} .

Gdy to zrobisz, po prostu uruchom go w programie Windows PowerShell^{(Windows PowerShell)} , a uruchomi środowisko Windows Sandbox , które przekaże zasoby komputera do projektu przetwarzania rozproszonego.

All the best!

How to securely donate CPU time using Windows Sandbox

In this world, computing pоwer leads to miracles. Computing рower can play a major role in solving problems that revolve us around. This is one of the reasons, the entire tech industry (including Mіcrosoft) is invested in Quantum computing that will help to make a computer more еfficient to ѕolve these problems. Folding Home is a distributed computing project that performs molecular dynamics simulations of protein dynamics.

Microsoft has posted a detailed guide by which anyone can donate their computer’s resources to the project. We will be talking about how to securely donate CPU time with Windows Sandbox in this guide.

Securely donate CPU time using Windows Sandbox

Before you get started, you need to make sure that Windows Sandbox is enabled on your computer.

Now, open Notepad and copy and paste the following code in it:

#Requires -RunAsAdministrator

#For a custom username, add -username <your username> to the command execution
param([string]$username=‘wsandbox_anon‘)
$ProgressPreference = ‘SilentlyContinue‘ #Progress bar makes things way slower

# Ensure that virtualization is enabled in BIOS.
Write-Output ‘Verifying that virtualization is enabled in BIOS…‘
if ((Get-WmiObject Win32_ComputerSystem).HypervisorPresent -eq $false) {
Write-Output ‘ERROR: Please Enable Virtualization capabilities in your BIOS settings…‘
exit
}

# Determine if Windows Sandbox is enabled.
Write-Output ‘Checking to see if Windows Sandbox is installed…‘
If ((Get-WindowsOptionalFeature –FeatureName ‘Containers-DisposableClientVM‘ –Online).State -ne ‘Enabled‘) {
Write-Output ‘Windows Sandbox is not installed, attempting to install it (may require reboot)…‘
if ((Enable-WindowsOptionalFeature –FeatureName ‘Containers-DisposableClientVM‘ –All –Online –NoRestart).RestartNeeded) {
Write-Output ‘Please reboot to finish installing Windows Sandbox, then re-run this script…‘
exit
}
} else {
Write-Output ‘Windows Sandbox already installed.‘
}

# Download the latest version of FAH.
Write-Output ‘Checking for latest version of foldingathome…‘
$installer_url = ‘https://download.foldingathome.org/releases/public/release/fah-installer/windows-10-32bit/‘

# Use regex to get the latest version from the FAH website.
$version = ((Invoke-WebRequest –Uri $installer_url –UseBasicParsing).Links | Where-Object {$_.href -match ‘^v\d+([.]\d+)?‘} | ForEach-Object {[float]($_.href -replace ‘[^.\d]‘, ‘‘)} | Measure-Object –Max).Maximum
$installer = “$($installer_url)v$($version)/latest.exe“
$installer_size =(Invoke-WebRequest $installer –Method Head –UseBasicParsing).Headers.‘Content-Length‘
Write-Output “Using FAH v$version.“

# Check if the installer is present, download otherwise.
$working_dir = “$env:USERPROFILE\fah_conf“
$install_fname = ‘folding_installer.exe‘
If (!(test-path “$working_dir\$install_fname“) -or (Get-ChildItem “$working_dir\$install_fname“).Length -ne $installer_size ) {
Remove-Item “$working_dir\$install_fname“ –Force –ErrorAction SilentlyContinue
Write-Output “Downloading latest folding executable: $working_dir\$install_fname“
Write-Output “Saving to $working_dir\$install_fname…“
New-Item –ItemType Directory –Force –Path $working_dir | Out-Null
Invoke-WebRequest –Uri $installer –OutFile “$working_dir\$install_fname“
}

# Create the FAH configuration file with the Windows Sandbox FAH team #251561.
Write-Output ‘Creating init command…‘
$conf_file = ‘fah_sandbox_conf.xml‘
Write-Output “Saved [email protected] configuration file to $working_dir\$conf_file“
New-Item –Force –Path “$working_dir\$conf_file“ –ItemType File
Set-Content –Path “$working_dir\$conf_file“ –Value @”
<config>
<user v=’$username‘/>
<team v=’251561’/>
<core-priority v=’low’/>
<power v=’full’ />
<priority v=’realtime’/>
<smp v=’true’/>
<gpu v=’true’/>
<open-web-control v=’true’/>
</config>
“@

<#
Create the script that runs at logon. This script:
1. Starts the installer
2. Creates a volatile working directory
3. Copies the config into the working directory
4. Sets the firewall policies to let FAH run
5. Starts the FAH client
#>
Write-Output ‘Creating init command…‘
$logon_cmd = “$working_dir\init.cmd“
$wdg_install_dir = ‘C:\users\wdagutilityaccount\desktop\fah_conf‘
$wdg_working_dir = ‘C:\users\wdagutilityaccount\desktop\fah_working_dir‘
Write-Output “Saved logon script to $logon_cmd, this will be run upon starting Sandbox.“
New-Item –Force –Path $logon_cmd –ItemType File
Set-Content –Path $logon_cmd –Value @”
start $wdg_install_dir\$install_fname /S
goto WAITLOOP

:WAITLOOP
if exist “C:\Program Files (x86)\FAHClient\FAHClient.exe” goto INSTALLCOMPLETE
ping -n 6 127.0.0.1 > nul
goto WAITLOOP

:INSTALLCOMPLETE
mkdir $wdg_working_dir
cd $wdg_working_dir
echo \”Copying config file to $wdg_working_dir\”
copy $wdg_install_dir\$conf_file $wdg_working_dir
netsh advfirewall firewall Add rule name=”FAHClient” program=”C:\Program Files (x86)\FAHClient\FAHClient.exe” action=allow dir=out
netsh advfirewall firewall Add rule name=”FAHClient” program=”C:\Program Files (x86)\FAHClient\FAHClient.exe” action=allow dir=in
start C:\”Program Files (x86)”\FAHClient\FAHClient.exe –config $wdg_working_dir\$conf_file
“@

# Create the Sandbox configuration file with the new working dir & LogonCommand.
$sandbox_conf = “$working_dir\fah_sandbox.wsb“
Write-Output “Creating sandbox configuration file to $sandbox_conf“
New-Item –Force –Path $sandbox_conf –ItemType File
Set-Content –Path $sandbox_conf –Value @”
<Configuration>
<VGpu>Enable</VGpu>
<MappedFolders>
<MappedFolder>
<HostFolder>$working_dir</HostFolder>
<ReadOnly>true</ReadOnly>
</MappedFolder>
</MappedFolders>
<LogonCommand>
<Command>$wdg_install_dir\init.cmd</Command>
</LogonCommand>
</Configuration>
“@

# For convenience, start the Sandbox.
Write-Output ‘Starting sandbox…‘
Start-Process ‘C:\WINDOWS\system32\WindowsSandbox.exe‘ –ArgumentList $sandbox_conf

Alternatively, you could just download it from Microsoft’s GitHub repository.

Once done, just run it with Windows PowerShell and it will start a Windows Sandbox environment that will donate your computer’s resources to the distributed computing project.

All the best!

Related posts

• Włącz lub wyłącz zasady grupy udostępniania drukarek w Windows Sandbox

• Jak włączyć Windows Sandbox w systemie gościa VirtualBox?

• Włącz lub wyłącz wejście wideo w Windows Sandbox

• Błąd Application Guard lub Windows Sandbox 0x80070003, 0xC0370400

• Włącz lub wyłącz udostępnianie schowka w Windows Sandbox

• Procesor nie działa z pełną prędkością lub wydajnością w systemie Windows 11/10

• Napraw wysokie zużycie procesora przez proces LSAISO w systemie Windows 10

• Jak zmniejszyć użycie procesora Discord w systemie Windows 11/10?

• Napraw wysokie użycie procesora przez XboxStat.exe w systemie Windows 11/10

• Windows Sandbox nie uruchomił się, błąd 0x800706d9

• Jak wyłączyć sieć w Windows Sandbox w Windows 10?

• Usługi pulpitu zdalnego powodują wysoki procesor w systemie Windows 11/10

• Microsoft Excel powoduje wysokie zużycie procesora podczas pracy w systemie Windows 10

• Jak skonfigurować i korzystać z piaskownicy przeglądarki w systemie Windows

• Napraw aplikację usług i kontrolera Wysokie zużycie procesora w systemie Windows 11/10

• Jak skonfigurować Windows Sandbox (uruchamiać aplikacje/skrypty, udostępniać foldery itp.)

• Co to jest wuauserv? Jak naprawić wysokie zużycie procesora wuauserv w systemie Windows 11/10?

• Najlepsze bezpłatne oprogramowanie do monitorowania i sprawdzania temperatury procesora na komputer z systemem Windows

• Microsoft Office Szybka instalacja Wysokie użycie procesora w systemie Windows 11/10

• Temperatura rdzenia: Mierz i monitoruj temperaturę procesora w systemie Windows 11/10